9088-200, WHITE, 50M X 25MM

Double sided adhesive tape 9088-200 Product Data Sheet January 2019 Supersedes: May 2017 Product Description Double sided adhesive tape with polyester carrier and modified acrylic adhesive Key Features • • • • • • Application ideas High adhesion to nearly every high and low surface energy substrate High initial tack All purpose tape Good UV resistance High shear and temperature resistance Easy handling and converting due to polyester carrier • • • Self- adhesive mounting of furniture trim, sealing profiles and cable ducts Bonding and mounting of sales displays and billboards Fixing of decorative trims and emblems Construction Adhesive Type Modified Acrylic Adhesive side open face 1 0,09 mm Adhesive Carrier Transparent PET 0,012 mm Adhesive back side 2 0,09 mm Tape Colour colourless Total thickness without liner 0,20 mm Release Liner Glassine paper, white 94 g/m² 0,08 mm 1 open face side is visible when unwinding the roll. 2 the back side is visible after removing the liner Calipers are average values 9088-200 January 2019 Performance Characteristics Adhesion to Stainless Steel - [N/25 mm] 29 Finat FTM1 - (72h RT, 180° peel angle, 300mm/min, Haul-off speed, 0,05 mm PET) Adhesion to Polypropylene - [N/25 mm] 26 Finat FTM1 - (72h RT, 180° peel angle, 300mm/min, Haul-off speed, 0,05 mm PET) Adhesion to Polycarbonate - [N/25 mm] 20 Finat FTM1 - (72h RT, 180° peel angle, 300mm/min, Haul-off speed, 0,05 mm PET) Adhesion to ABS - [N/25 mm] 24 Finat FTM1 - (72h RT, 180° peel angle, 300mm/min, Haul-off speed, 0,05 mm PET) Static Shear Resistance to Stainless Steel - [min] > 10.000 Finat FTM8 - (RT, 1 kg/1”x1”) Static shear resistance to stainless steel - [min] > 10.000 Finat FTM8 - (at 90 °C, 0,5 kg/1”x1”.) Temperature resistance Pass SAFT - (40-180 °C; 2°C/min) 500g /1”x1”) Solvent Resistance (KBA, Issue March 2014) Media Substrate Immersion time [h] Deionized Water 5 % Hydrochloric Acid 1% Sodium hydroxid Ethyl Alcohol Glass 1 Immersion temperature [°C] 50 ± 2 Glass 1 20 ± 2 no change good adhesion Glass Glass 0,50 0,25 20 ± 2 20 ± 2 slight delamination of edges sample slightly moved good adhesion good adhesion Premium gasoline, lead - free Aluminium 0,3 20 ± 2 slight leakage of adhesive adhesive edge swelled (5 %) good adhesion (95 %) Diesel Aluminium 0,5 20 ± 2 slight leakage of adhesive adhesive edge swelled (5 %) good adhesion (95 %) Methyl-Ehyl-Ketone Aluminium 0,5 20 ± 2 slight leakage of adhesive adhesive edge swelled (5 %) good adhesion (95 %) Motor oil (HD Oil) 5 %Tenside (amphoteric,an-ionic nonionic) in H2O Aluminium 1,00 20 ± 2 no change good adhesion Glass 0,5 20 ± 2 no change good adhesion Visual assessment after 48h reconditioning at RT no change Temperature resistance Storage & Shelf Life Short term (minutes, max.1 hour): -40 °C – 150 °C Long term (days, weeks): 90 °C Store at 16 °C – 25 °C and 40-65 % relative humidity in its original box. The product can be stored up to 24 months after production. Note: The shelf life may be shortened if the original packaging is not properly sealed or stored in an environment with high temperatures or humidity Precautionary Information Refer to product label and Material Safety Data Sheet for health and safety information before using the product. For information please contact your local 3M Office. www.3M.com For Additional Information To request additional product information or to arrange for sales assistance, call…… Address correspondence to: 3M Important Notice All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method or application. All questions of liability relating to this product are governed by the terms of the sale subject, where applicable, to the prevailing law Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations 3M United Kingdom PLC 2M Centre, Cain Road, Bracknell RG12 8HT United Kingdom 3M Svenska AB Herrjärva torg 4 170 67 Solna Sweden 3M Eesti OÜ Pärnu mnt. 158 11317 Tallinn Estonia 3M Ireland Ltd The Iveagh Building, 3rd Floor The Park, Carrickmines 18 Ireland 3M a/s Hannemanns Allé 53 DK-2300 Copenhagen S. Denmark 3M Latvia SIA K.Ulmaņa gatve 5 Rīga, LV-1004 Latvia 3M Belgium bvba/sprl Hermeslaan 7 1831 Diegem Belgium 3M Norge AS Tærudgata 16 2004 Lillestrøm Norway 3M Lietuva UAB A.Goštauto g. 40 Vilnius LT- 03163 Lithuania 3M Nederland B.V. Molengraaffsingel 29 2629 JD Delft The Netherlands Suomen 3M Oy Keilaranta 6 02150 Espoo Finland